#
#
#    #########################################
#    ##                                     ##
#    ##    FUSE Phase 2 Proposal Template   ##
#    ##                                     ##
#    ##    for Use in Cycle 1, 8/1/98       ##
#    ##                                     ##
#    #########################################
#
#  Refer to FUSE Cycle 1 Phase 2 Instructions for details.
#

# Proposal Identification
prog_id:	
title: 		
t_alloc_total: 	        # Ksec
t_alloc_orb:            # Orbits, for French programs only.


#    ######################
#    ##                  ##
#    ##  PI Information  ##
#    ##                  ##
#    ######################

pi_title:       
pi_first_name:  
pi_last_name:   
pi_affiliation: 
pi_institution: 
pi_address:     
pi_country:     
pi_phone:	
pi_fax:         
pi_email:       


#    ######################
#    ##                  ##
#    ##  LI Information  ##
#    ##                  ##
#    ######################

# Optional, if Program PI designates a separate primary contact person.

li_title:	
li_first_name: 	
li_last_name:	
li_affiliation: 
li_institution: 
li_address:     
li_country:     
li_phone:	
li_fax:		
li_email:	

#    ########################
#    ##                    ##
#    ##  COIs Information  ##
#    ##                    ##
#    ########################

# COI - 1, repeat as necessary for other Co-Is.
coi_title:		
coi_first_name:		
coi_last_name:		
coi_institution:	
coi_country:     
coi_phone:       	
coi_email:       	


#    ############################
#    ##                        ##
#    ##  Proposal Information  ##
#    ##                        ##
#    ############################
#
#  NOTE: Although not required, keeping text block lines to 80 character
#  or less will prevent line wraps and improve readability in the formatted
#  output.

#  -------------
# |  Abstract   |
#  -------------

abstract_text:

#ENTER ABSTRACT TEXT HERE.

#  ----------------
# |  Feasibility   |
#  ----------------

feasibility_text:

#ENTER FEASIBILITY DISCUSSION HERE.

#  ------------------
# |  Special Reqs.   |
#  ------------------

spec_req_text:

#ENTER DISCUSSION OF ANY SPECIAL REQUIREMENTS HERE.

#  ------------------
# |  Support Info.   |
#  ------------------

support_info_text:

#ENTER ANY OTHER SUPPORTING INFORMATION HERE.

#
# Object-specific Information
#
# Repeat these keywords as necessary for each separate target.
# Optional keywords may be left blank or dropped entirely.
#

#    ############################
#    ##                        ##
#    ##  Object 1 Information  ##
#    ##                        ##
#    ############################
#
#  Note: You should shorten or remove comments at right to avoid line
#  wraps in you electronic submission.  (Many "mailers" seem to do this,
#  and it gives the Parser program problems!)
#



object_number:  	            # 1-99
object_name:  		            # From Phase 1 when possible.
object_class:  		            # See Appendix B.
object_spec_req:                    # MOVE, TOO, NIGHT, HIRES
ra_j2000:  	                    # e.g. 20:31:45.22
dec_j2000:  		            # e.g. +31:02:01.5
source_type:  		            # PC, PE, EC, EE 
lambda_ref:  		            # e.g. 1032.
flux_lambda_ref:  	            # e.g. 1.2E-12
eline_fwhm:   		            # in Angstroms, e.g. 0.5
sb_lambda_ref:  	            # "flux" per sq. arcsec.
flux_950:                           # Equiv. Cont. Flux at 950 A
flux_1050:                          # Equiv. Cont. Flux at 1050 A
flux_1150:                          # Equiv. Cont. Flux at 1150 A
                                    # Flux format as above.
flux_accuracy: 		            # HIGH, MED, LOW.       
v_mag:			            # mag, e.g. 12.5
v_range:		            # mag range, e.g. 9.9-13.2
resolution_element:  	            # in Angstroms, e.g. 0.033.
expected_ct_rate:	            # cts/s, pref. from ETC or sim.
sig_noise: 		            # per specified res. element.
spectral_type:		            # No spaces please.
color_excess:  		            # mag, e.g. 0.10.
red_shift:		            # Z format or km/s.
high_prop_motion:	            # Y if you applied a PM correction.
object_prio:		            # 1, 2, or 4.
phase_zero:   		            # Only needed for Ephem. targets.
phase_period:   		    # Only needed for Ephem. targets.


#
#    #########################################
#    ##                                     ##
#    ##   Object Obs-specific Information   ##
#    ##                                     ##
#    #########################################
#
# Repeat as needed to specify additional observations of a given target.
# The `observation_num:' keyword must be first for each new observation.
#

observation_num:               # 1-99, or `1 TO N' if MON.
obs_object_num:                # `object_number' of target for this obs. 
off_object_num:                # `object_number' of offset target, if any. 
instrument_mode:               # HIST, TTAG
aperture_req:                  # HIRS, MDRS, LWRS
obs_time_req:                  # in sec, e.g. 20000
                               # NOTE: "per obs" for MON.

obs_spec_req:                  # ROLL, SNAP, SAFTSNP, MON, EPHEM,
                               # HOLD, FPSPLIT, XOFF, SPATIAL,
                               # CONTIG, and/or FESIMG.

#If ROLL spec. req.
aperture_pa:                   # angle in degrees, e.g. 135.0
pa_tolerance:                  # angle in degrees, e.g. 10.0

# If MON spec. req.
mon_t_sep:                     # days, e.g. 21.00
mon_delta_tsep:                # days, e.g. 2.50

# If EPHEM spec. req.
phase_desired:                 # e.g. 0.5
phase_delta:                   # e.g. 0.05

# If FESIMG spec. req.
targ_pos:                      # IN or OUT
fes_filter:                    # ND, COL, NONE, or DEF.


#
#
#